العربية

فارسی
Melayu
Tiếng Việt
Deutsch
Português
Español
Pусский
Français
简体中文
English
أنت هنا: بيت » أخبار » News » Product News » How to install press felt ?

How to install press felt ?

نشر الوقت: 2021-05-23     المنشأ: محرر الموقع

First, Precautions before operation:

1. Check whether the package is complete;

2. Check whether the product number, specification and weight are the same as the order content;

3. Open the package, check the felt appearance quality and size, verify the product number and check the running arrow.


Second, Precautions during installation:

1. Clean the relevant parts of the paper machine;

2. See clearly the front and back sides of the paper felt and its running direction;

3. Prevent oil contamination and hard objects from damaging the felt;

4. Do not pull hard.


Third, Precautions during idling:

1. Flatten all parts of the felt evenly;

2. Wet the felt evenly and fully with clean water;

3. Tension the felt properly;

4. Check the condition of all rollers and felt;

5. Exert certain pressure;

6. Paper machine crawling;

7. Further tension the felt;

8. Apply pressure to normal pressure;

9. Clean and soften the felt;

10. Turn on the washing water and vacuum system;

11. Adjust and check the felt running state.


Forth, Attentions when putting pulp to produce paper:

1. Make good preparation before releasing pulp;

2. Adjust the tension of the felt to the normal state in time after releasing the pulp;

3. Ensure that the line pressure on both sides of the pressing part is consistent and adjust the line pressure in time;

4. Ensure the normal operation of vacuum system and washing system;

5. Observe the running state of the felt and adjust it in time;

6. Prevent pulp and damaged paper from entering the pressing area or felt.


Fifth, Matters needing attention in daily maintenance:

1. Prevent felt from discount, uneven wear, uneven washing and damage;

2. Correctly use high-pressure water, fan-shaped water and vacuum washing box;

3. Strengthen the continuous and regular washing of felt, and use chemical detergents reasonably;

4. When the downtime exceeds four hours, wash and relax the felt thoroughly.


أخبار ذات صلة

محتوى فارغ!

أنشئت في عام 2010، Sun Hong Group هي شركة شاملة دمج التخطيط والتصميم والدعم الفني والإنتاج والاختبار والتدريب. لدينا المهنية التقنية ...
حقوق الطبع والنشر © مجموعة صن هونغ

اتصل بنا

+86 139 5134 9332
فاكس: +86 516 85697696
مكتب: مبنى A2 حديقة يونتشوانغ للعلوم والتكنولوجيا طريق بينشانان منطقة جولو مدينة شوتشو مقاطعة جيانغسو الصين
المصنع: المبنى الخامس رقم 241 طريق هواي هاي الغربي بالصين

اتصل بنا